add additional gpg settings

boot/loader/entries/arch-fallback.conf

@@ -0,0 +1,5 @@
+title	Arch Linux
+linux	/vmlinuz-linux
+initrd	/amd-ucode.img
+initrd	/initramfs-linux-fallback.img
+options rd.luks.name=3927d3f3-175f-4b72-9e05-395ef5664c81=cryptlvm rd.luks.options=discard root=/dev/ssd1/root resume=/dev/ssd1/swap rw add_efi_memmap kernel=30

boot/loader/entries/arch.conf

@@ -0,0 +1,5 @@
+title	Arch Linux
+linux	/vmlinuz-linux
+initrd	/amd-ucode.img
+initrd	/initramfs-linux.img
+options rd.luks.name=3927d3f3-175f-4b72-9e05-395ef5664c81=cryptlvm rd.luks.options=discard root=/dev/ssd1/root resume=/dev/ssd1/swap rw add_efi_memmap kernel=30

etc/fwupd/fwupd.conf

@@ -0,0 +1,8 @@
+# use `man 5 fwupd.conf` for documentation
+[fwupd]
+DisabledPlugins=test;test_ble
+OnlyTrusted=true
+AllowEmulation=false
+
+[uefi_capsule]
+DisableCapsuleUpdateOnDisk=true

etc/mkinitcpio.conf

@@ -3,7 +3,7 @@
 # The following modules are loaded before any boot hooks are
 # run.  Advanced users may wish to specify all system modules
 # in this array.  For instance:
-#     MODULES=(piix ide_disk reiserfs)
+#     MODULES=(usbhid xhci_hcd)
 MODULES=()
 
 # BINARIES
@@ -29,31 +29,32 @@ FILES=()
 # 'filesystems' is _required_ unless you specify your fs modules in MODULES
 # Examples:
 ##   This setup specifies all modules in the MODULES setting above.
-##   No raid, lvm2, or encrypted root is needed.
+##   No RAID, lvm2, or encrypted root is needed.
 #    HOOKS=(base)
 #
 ##   This setup will autodetect all modules for your system and should
 ##   work as a sane default
-#    HOOKS=(base udev autodetect block filesystems)
+#    HOOKS=(base udev autodetect modconf block filesystems fsck)
 #
 ##   This setup will generate a 'full' image which supports most systems.
 ##   No autodetection is done.
-#    HOOKS=(base udev block filesystems)
+#    HOOKS=(base udev modconf block filesystems fsck)
 #
-##   This setup assembles a pata mdadm array with an encrypted root FS.
-##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-#    HOOKS=(base udev block mdadm encrypt filesystems)
+##   This setup assembles a mdadm array with an encrypted root file system.
+##   Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
+#    HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
 #
-##   This setup loads an lvm2 volume group on a usb device.
-#    HOOKS=(base udev block lvm2 filesystems)
+##   This setup loads an lvm2 volume group.
+#    HOOKS=(base udev modconf block lvm2 filesystems fsck)
 #
 ##   NOTE: If you have /usr on a separate partition, you MUST include the
-#    usr, fsck and shutdown hooks.
-HOOKS=(base udev systemd autodetect keyboard sd-vconsole modconf block sd-encrypt lvm2 filesystems resume fsck)
+#    usr and fsck hooks.
+HOOKS=(base udev systemd autodetect modconf keyboard keymap block sd-encrypt lvm2 filesystems fsck)
 
 # COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
+# Use this to compress the initramfs image. By default, zstd compression
 # is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="zstd"
 #COMPRESSION="gzip"
 #COMPRESSION="bzip2"
 #COMPRESSION="lzma"
@@ -64,3 +65,9 @@ HOOKS=(base udev systemd autodetect keyboard sd-vconsole modconf block sd-encryp
 # COMPRESSION_OPTIONS
 # Additional options for the compressor
 #COMPRESSION_OPTIONS=()
+
+# MODULES_DECOMPRESS
+# Decompress kernel modules during initramfs creation.
+# Enable to speedup boot process, disable to save RAM
+# during early userspace. Switch (yes/no).
+#MODULES_DECOMPRESS="yes"

etc/pacman.d/gnupg/gpg.conf

@@ -6,3 +6,5 @@ keyserver hkps://hkps.pool.sks-keyservers.net:443
 #keyserver hkp://pgp.mit.edu:11371
 #keyserver hkp://keyserver.ubuntu.com
 keyserver hkps://keyserver.ubuntu.com
+keyserver-options import-clean
+keyserver-options no-self-sigs-only

etc/systemd/user/wayvnc.service

@@ -5,6 +5,7 @@ BindsTo=sway-session.target
 [Service]
 Type=simple
 ExecStart=/usr/bin/wayvnc
+Environment="WAYLAND_DISPLAY=wayland-1"
 Restart=on-failure
 RestartSec=1
 TimeoutStopSec=10

home/default/.config/alacritty/alacritty.toml

@@ -0,0 +1,3 @@
+[window]
+opacity=0.85
+decorations="None"

home/default/.config/kanshi/config

@@ -1,4 +1,8 @@
 profile {
 	output "LG Electronics LG IPS QHD 201NTPCGD520" enable scale 1.30 position 0,0 mode 2560x1440@60Hz
-	output "LG Electronics LG ULTRAWIDE 0x00000101" enable position 1968,0 mode 2560x1080@60Hz
+	output "LG Electronics LG ULTRAWIDE 0x01010101" enable position 1968,0 mode 2560x1080@60Hz
+}
+
+profile {
+	output "BOE 0x0BCA Unknown" enable scale 1.75 position 0,0 mode 2256x1504@59.999Hz
 }

home/default/.config/sway/config

@@ -9,7 +9,7 @@ set $down j
 set $up k
 set $right l
 
-set $term kitty
+set $term alacritty
 set $menu rofi -show combi | xargs swaymsg exec --
 
 # wallpaper
@@ -44,12 +44,12 @@ exec_always {
 # timeout
 exec swayidle -w \
     timeout 300 'playerctl -a pause && swaylock' \
-    timeout 600 'swaymsg "output * dpms off"' \
+    timeout 600 'swaymsg "output * power off"' \
     before-sleep 'playerctl -a pause' \
     lock 'swaylock' \
-    resume 'swaymsg "output * dpms on"'
+    resume 'swaymsg "output * power on"'
 
-# screen lock
+# system lock
 bindsym Ctrl+Shift+l exec "playerctl -a pause; \
     systemctl suspend && \
     swaylock"
@@ -227,6 +227,9 @@ bindsym $mod+Shift+d border toggle
 bindsym $mod+m exec makoctl dismiss
 bindsym $mod+n exec makoctl restore
 
+# wayvnc
+bindsym $mod+Shift+p exec wayvncctl output-cycle
+
 ### styles
 
 # class			border	backgr	text

home/default/scripts/append-urls-to-titles

@@ -21,3 +21,5 @@ fi
 cat append.txt | wget-titles-from-urls >> titles.txt
 cat append.txt | youtube-audio
 > append.txt
+
+standardize-music

home/default/scripts/booksplit

@@ -1,46 +0,0 @@
-#!/bin/sh
-
-# Requires ffmpeg (audio splitting) and my `tag` wrapper script.
-
-[ ! -f "$2" ] && printf "The first file should be the audio, the second should be the timecodes.\\n" && exit
-
-echo "Enter the album/book title:"; read -r booktitle
-
-echo "Enter the artist/author:"; read -r author
-
-echo "Enter the publication year:"; read -r year
-
-inputaudio="$1"
-
-# Get a safe file name from the book.
-#escbook="$(echo "$booktitle" | iconv -cf UTF-8 -t ASCII//TRANSLIT | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g")"
-escbook="$(echo "$booktitle" | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g")"
-
-! mkdir -p "$escbook" && echo "Do you have write access in this directory?" && exit 1
-
-# As long as the extension is in the tag script, it'll work.
-ext="opus"
-#ext="${1#*.}"
-
-# Get the total number of tracks from the number of lines.
-total="$(wc -l < "$2")"
-
-while read -r x;
-do
-	end="$(echo "$x" | cut -d' ' -f1)"
-	[ -n "$start" ] &&
-	echo "From $start to $end; $track $title"
-	file="$escbook/$(printf "%.2d" "$track") - $author - $esctitle.$ext"
-	[ -n "$start" ] && echo "Splitting \"$title\"..." && ffmpeg -nostdin -y -loglevel -8 -i "$inputaudio" -ss "$start" -to "$end" -vn "$file" &&
-		echo "Tagging \"$title\"..." && tag -a "$author" -A "$booktitle" -t "$title" -n "$track" -N "$total" -d "$year" "$file"
-	title="$(echo "$x" | cut -d' ' -f 2-)"
-	# esctitle="$(echo "$title" | iconv -cf UTF-8 -t ASCII//TRANSLIT | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g")"
-	esctitle="$(echo "$title" | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g")"
-	track="$((track+1))"
-	start="$end"
-done < "$2"
-# The last track must be done outside the loop.
-echo "From $start to the end: $title"
-file="$escbook/$track - $author - $esctitle.$ext"
-echo "Splitting \"$title\"..." && ffmpeg -nostdin -y -loglevel -8 -i "$inputaudio" -ss "$start" -vn "$file" &&
-		echo "Tagging \"$title\"..." && tag -a "$author" -A "$booktitle" -t "$title" -n "$track" -N "$total" -d "$year" "$file"

home/default/scripts/convert-to-audio

@@ -1,32 +0,0 @@
-#!/usr/bin/env sh
-
-# rename .MKV -> .MKV
-count=`ls -1 *.JPG 2>/dev/null | wc -l`
-if [ $count != 0 ]; then
-  rename MKV mkv *.MKV
-fi
-  
-# convert to opus
-count=`ls -1 *.mkv 2>/dev/null | wc -l`
-if [ $count != 0 ]; then
-  for i in *.mkv; do
-    ffmpeg -i "$i" "${i%.mkv}.opus";
-    rm "$i";
-  done
-fi
-
-# rename .WEBM -> .webm
-count=`ls -1 *.WEBM 2>/dev/null | wc -l`
-if [ $count != 0 ]; then 
-  rename WEBM webm *.WEBM
-fi
-  
-# convert to opus
-count=`ls -1 *.webm 2>/dev/null | wc -l`
-if [ $count != 0 ]; then
-  for i in *.webm; do
-    ffmpeg -i "$i" "${i%.webm}.opus";
-    rm "$i";
-  done
-fi 
-

home/default/scripts/mp3-to-opus

@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-for i in *.mp3; do ffmpeg -i "$i" -c:a libopus "${i%.*}.opus"; done
-trash *.mp3

home/default/scripts/restart-audio

@@ -1,8 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-echo stopping pipewire...
-systemctl --user stop pipewire
-echo starting pipewire...
-systemctl --user start pipewire
-

home/default/scripts/restart-bluetooth

@@ -1,12 +1,13 @@
 #!/usr/bin/env bash
-set -euo pipefail
+set -euox pipefail
+
+pkill -f blueman-manager || true
 
 echo stopping bluetooth...
-sudo systemctl stop bluetooth-autoconnect
 sudo systemctl stop bluetooth
-sudo rmmod btusb
+sudo modprobe -r btusb
 
 echo starting bluetooth...
 sudo modprobe btusb
 sudo systemctl start bluetooth
-sudo systemctl start bluetooth-autoconnect
+sudo rfkill unblock bluetooth

home/default/scripts/scrub-ufw

@@ -1,16 +0,0 @@
-#!/bin/sh
-echo "Stopping firewall and allowing everyone..."
-ipt="/usr/bin/iptables"
-## Failsafe - die if /sbin/iptables not found
-[ ! -x "$ipt" ] && { echo "$0: \"${ipt}\" command not found."; exit 1; }
-$ipt -P INPUT ACCEPT
-$ipt -P FORWARD ACCEPT
-$ipt -P OUTPUT ACCEPT
-$ipt -F
-$ipt -X
-$ipt -t nat -F
-$ipt -t nat -X
-$ipt -t mangle -F
-$ipt -t mangle -X
-$ipt iptables -t raw -F
-$ipt -t raw -X

home/default/scripts/sort-by-length

@@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-cat input.txt | awk '{ print length, $0 }' | sort -n | cut -d" " -f2-

home/default/scripts/standardize-music

@@ -0,0 +1,41 @@
+#!/usr/bin/env sh
+set -oux pipefail
+
+# removes more modern codecs to just files that can fit on my mp3 player
+
+count=`ls -1 *.M4A 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+  rename M4A m4a *.M4A
+fi
+  
+count=`ls -1 *.m4a 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+    for i in *.m4a; do
+        ffmpeg -y -i "$i" "${i%.*}.ogg" && rm "$i"
+    done
+fi
+
+count=`ls -1 *.WEBM 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+  rename WEBM webm *.WEBM
+fi
+  
+count=`ls -1 *.webm 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+    for i in *.webm; do
+        ffmpeg -y -i "$i" "${i%.*}.ogg" && rm "$i"
+    done
+fi
+
+count=`ls -1 *.OPUS 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+  rename OPUS opus *.OPUS
+fi
+  
+count=`ls -1 *.opus 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+    for i in *.opus; do
+        ffmpeg -y -i "$i" "${i%.*}.ogg" && rm "$i"
+    done
+fi
+

home/default/scripts/tag

@@ -1,59 +0,0 @@
-#!/bin/sh
-
-err() { echo "Usage:
-	tag [OPTIONS] file
-Options:
-	-a: artist/author
-	-t: song/chapter title
-	-A: album/book title
-	-n: track/chapter number
-	-N: total number of tracks/chapters
-	-d: year of publication
-	-g: genre
-	-c: comment
-You will be prompted for title, artist, album and track if not given." && exit 1 ;}
-
-while getopts "a:t:A:n:N:d:g:c:f:" o; do case "${o}" in
-	a) artist="${OPTARG}" ;;
-	t) title="${OPTARG}" ;;
-	A) album="${OPTARG}" ;;
-	n) track="${OPTARG}" ;;
-	N) total="${OPTARG}" ;;
-	d) date="${OPTARG}" ;;
-	g) genre="${OPTARG}" ;;
-	c) comment="${OPTARG}" ;;
-	f) file="${OPTARG}" ;;
-	*) printf "Invalid option: -%s\\n" "$OPTARG" && err ;;
-esac done
-
-shift $((OPTIND - 1))
-
-file="$1"
-
-[ ! -f "$file" ] && echo "Provide file to tag." && err
-
-[ -z "$title" ] && echo "Enter a title." && read -r title
-[ -z "$artist" ] && echo "Enter an artist." && read -r artist
-[ -z "$album" ] && echo "Enter an album." && read -r album
-[ -z "$track" ] && echo "Enter a track number." && read -r track
-
-case "$file" in
-	*.ogg) echo "Title=$title
-Artist=$artist
-Album=$album
-Track=$track
-Total=$total
-Date=$date
-Genre=$genre
-Comment=$comment" | vorbiscomment -w "$file" ;;
-	*.opus) echo "Title=$title
-Artist=$artist
-Album=$album
-Track=$track
-Total=$total
-Date=$date
-Genre=$genre
-Comment=$comment" | opustags -i -S "$file" ;;
-	*.mp3) eyeD3 -Q --remove-all -a "$artist" -A "$album" -t "$title" -n "$track" -N "$total" -Y "$date" "$file" ;;
-	*) echo "File type not implemented yet." ;;
-esac

home/default/scripts/youtube-audio

@@ -2,7 +2,7 @@
 
 # --embed-thumbnail \
 # --audio-format opus \
-youtube-dl \
+yt-dlp \
     --ignore-errors \
     -f bestaudio \
     --rm-cache-dir \

packages.txt

@@ -1,9 +1,13 @@
+acpi
 adobe-source-han-sans-jp-fonts
 adobe-source-han-sans-kr-fonts
 aic94xx-firmware
+alacritty
 amd-ucode
+android-udev
 anki-bin
 arch-install-scripts
+arduino-ide-bin
 asdf-vm
 atomicparsley
 atool
@@ -17,7 +21,6 @@ bind
 binutils
 bison
 blueman
-bluetooth-autoconnect
 brightnessctl
 bzip2
 calibre
@@ -31,14 +34,13 @@ cowsay
 cpupower
 cpupower-gui
 cryptsetup
-cups
 cups-pdf
 darktable
-ddclient
 device-mapper
 dhcpcd
 dialog
 diffutils
+dino
 direnv
 downgrade
 dxvk-bin
@@ -47,14 +49,11 @@ efibootmgr
 electrum
 elinks
 emacs
-esptool
 etcher-bin
 evince
 evolution
 f2fs-tools
-fail2ban
 fakeroot
-fcitx5
 fcitx5-chinese-addons
 fcitx5-configtool
 fcitx5-gtk
@@ -65,7 +64,6 @@ ffmpegthumbnailer
 file
 filesystem
 findutils
-firefox
 flex
 font-manager
 fortune-mod
@@ -78,17 +76,18 @@ fortune-mod-hitchhiker
 fortune-mod-matrix
 fortune-mod-portal-game
 fortune-mod-starwars
+fprintd
+framework-system-git
 freecad
+freerdp
 fwbuilder
 fwupd
-gajim
 gamemode
 gawk
 gcc
 gcc-libs
 gdlauncher-bin
 gedit
-geoclue
 gettext
 gimp
 git
@@ -96,44 +95,43 @@ git-lfs
 glibc
 gnome-disk-utility
 gnome-firmware
+gnome-keyring
 gnome-sound-recorder
 gnu-free-fonts
 gnu-netcat
-gnutls
-google-chrome
 gparted
+gphoto2
 grep
 grim
 grub
 gsmartcontrol
-gsound
 gst-libav
 gst-plugins-bad
 gst-plugins-ugly
 gstreamer-vaapi
 gtk-engine-murrine
 gutenprint
+gvfs-gphoto2
 gwakeonlan
 gzip
 handbrake
 hddtemp
+hexedit
 highlight
 htop
 hugin
 hunspell-en_us
+iio-sensor-proxy
 inkscape
 inotify-tools
 iotop
 iproute2
 iputils
 itstool
-iucode-tool
 iw
 jammr
-jansson
 jq
 kanshi
-kcm-wacomtablet
 kdocker
 keepassxc
 kid3
@@ -144,50 +142,26 @@ lagrange
 leptonica
 less
 lib32-gamemode
-lib32-giflib
-lib32-gnutls
 lib32-gst-plugins-base-libs
 lib32-gtk3
-lib32-libappindicator-gtk2
 lib32-libappindicator-gtk3
-lib32-libgpg-error
-lib32-libjpeg-turbo
-lib32-libldap
-lib32-libpng
-lib32-libpulse
-lib32-libva
 lib32-libva-mesa-driver
-lib32-libxcomposite
-lib32-libxinerama
 lib32-libxslt
-lib32-mesa-vdpau
-lib32-mpg123
 lib32-ocl-icd
-lib32-openal
-lib32-sqlite
 lib32-v4l-utils
 lib32-vkd3d
-lib32-vulkan-icd-loader
 libappindicator-gtk3
 libdvdcss
 libffado
-libglvnd
 libgnome-keyring
 libgooglepinyin
-libime
-libjbig-shared
-libjpeg6-turbo
 libpinyin
-libpng
-libreoffice-extension-languagetool
 libreoffice-still
 libretro-overlays
 libretro-shaders-slang
-librewolf-bin
 libva-mesa-driver
 libva-utils
 libvncserver
-libxkbcommon
 licenses
 linux
 linux-firmware
@@ -210,6 +184,7 @@ mcomix
 mcpp
 mdadm
 mediainfo
+merkuro
 mesa
 minecraft-launcher
 mixxx
@@ -217,7 +192,6 @@ mousetweaks
 mpc
 mpv
 mpv-mpris
-mqtt-explorer
 mumble
 namcap
 nano
@@ -235,18 +209,18 @@ noto-fonts-extra
 ntfs-3g
 ntp
 nvtop
-ocl-icd
 odt2txt
-opencc
 opendesktop-fonts
 openshot
+openvpn
 opustags
 overdue
+p7zip
 package-query
+pacman
 papirus-icon-theme
 patch
 pavucontrol
-pc-ble-driver
 pciutils
 perl
 perl-image-exiftool
@@ -256,34 +230,29 @@ piper
 pipewire-alsa
 pipewire-jack
 pipewire-pulse
-pixman
 pkgconf
 pkgstats
 playerctl
 playonlinux
 polkit-gnome
 postgresql-libs
+prismlauncher
+power-profiles-daemon
+powertop
 procps-ng
 psensor
 psmisc
 pv
-pyside2
-python
 python-axolotl
 python-levenshtein
 python-matplotlib
 python-mutagen
-python-nrfutil
 python-pip
-python-pycryptodome
 python-pyenchant
 python-pylast
 python-pynvim
 python-wxpython
-qbittorrent
 qt5ct
-qt5-graphicaleffects
-qt5-imageformats
 quodlibet
 ranger
 rar
@@ -293,9 +262,7 @@ remmina
 retroarch
 retroarch-assets-xmb
 rofi
-rsnapshot
 rsync
-samsung_magician-consumer-ssd
 seahorse
 sed
 shadow
@@ -305,39 +272,24 @@ simple-scan
 slurp
 smartmontools
 s-nail
-sndio
 ssh-audit
 sshpass
 stalonetray
 steam
-steam-native-runtime
 sudo
 sway
-swaybg
 swayidle
 swaylock
 syncplay
 syncthing
 syncthing-gtk
 sysfsutils
+systemd
 systemd-sysvcompat
 systemd-ui
 tar
 telegram-desktop
 texinfo
-texlive-basic
-texlive-bibtexextra
-texlive-bin
-texlive-fontsextra
-texlive-formatsextra
-texlive-games
-texlive-humanities
-texlive-latexextra
-texlive-mathscience
-texlive-music
-texlive-pictures
-texlive-pstricks
-texlive-publishers
 tlp
 tmux
 traceroute
@@ -346,7 +298,6 @@ tree
 ttf-dejavu
 ttf-ibm-plex
 ttf-joypixels
-ttf-liberation
 ttf-ms-fonts
 ttf-opensans
 ttf-symbola-free
@@ -365,6 +316,7 @@ vulkan-mesa-layers
 vulkan-radeon
 vulkan-tools
 w3m
+wacomtablet
 wakeonlan
 waybar
 wayland-utils
@@ -372,7 +324,6 @@ wayvnc
 wd719x-firmware
 wdisplays
 wf-recorder
-wget
 which
 wine-staging
 winetricks
@@ -381,9 +332,8 @@ wl-clipboard
 wol
 wpa_supplicant
 xclip
-xdg-desktop-portal
+xdg-desktop-portal-gnome
 xdg-desktop-portal-wlr
-xf86-input-wacom
 xf86-video-amdgpu
 xfsprogs
 xorg-xdpyinfo
@@ -394,4 +344,3 @@ xsel
 xterm
 yay-bin
 yt-dlp
-zimg

readme.md

@@ -28,7 +28,7 @@ please let me know if i've forgotten one!
 - waybar (topbar)
 - swayidle (idle daemon)
 - swaylock (lockscreen)
-- kitty (terminal)
+- alacritty (terminal)
 - ranger (file browser)
 - rofi (launcher)
 - mako (notification daemon)