add laptop changes

boot/loader/entries/arch-fallback.conf

@@ -0,0 +1,5 @@
+title	Arch Linux
+linux	/vmlinuz-linux
+initrd	/amd-ucode.img
+initrd	/initramfs-linux-fallback.img
+options rd.luks.name=e7ff5b82-f145-4fae-be2a-388314977783=cryptlvm rd.luks.options=discard root=/dev/ssd/root resume=/dev/ssd/swap rw add_efi_memmap kernel=30

boot/loader/entries/arch.conf

@@ -0,0 +1,5 @@
+title	Arch Linux
+linux	/vmlinuz-linux
+initrd	/amd-ucode.img
+initrd	/initramfs-linux.img
+options rd.luks.name=e7ff5b82-f145-4fae-be2a-388314977783=cryptlvm rd.luks.options=discard root=/dev/ssd/root resume=/dev/ssd/swap rw add_efi_memmap kernel=30

etc/mkinitcpio.conf

@@ -3,7 +3,7 @@
 # The following modules are loaded before any boot hooks are
 # run.  Advanced users may wish to specify all system modules
 # in this array.  For instance:
-#     MODULES=(piix ide_disk reiserfs)
+#     MODULES=(usbhid xhci_hcd)
 MODULES=()
 
 # BINARIES
@@ -29,31 +29,32 @@ FILES=()
 # 'filesystems' is _required_ unless you specify your fs modules in MODULES
 # Examples:
 ##   This setup specifies all modules in the MODULES setting above.
-##   No raid, lvm2, or encrypted root is needed.
+##   No RAID, lvm2, or encrypted root is needed.
 #    HOOKS=(base)
 #
 ##   This setup will autodetect all modules for your system and should
 ##   work as a sane default
-#    HOOKS=(base udev autodetect block filesystems)
+#    HOOKS=(base udev autodetect modconf block filesystems fsck)
 #
 ##   This setup will generate a 'full' image which supports most systems.
 ##   No autodetection is done.
-#    HOOKS=(base udev block filesystems)
+#    HOOKS=(base udev modconf block filesystems fsck)
 #
-##   This setup assembles a pata mdadm array with an encrypted root FS.
+##   This setup assembles a mdadm array with an encrypted root file system.
-##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
+##   Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
-#    HOOKS=(base udev block mdadm encrypt filesystems)
+#    HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
 #
-##   This setup loads an lvm2 volume group on a usb device.
+##   This setup loads an lvm2 volume group.
-#    HOOKS=(base udev block lvm2 filesystems)
+#    HOOKS=(base udev modconf block lvm2 filesystems fsck)
 #
 ##   NOTE: If you have /usr on a separate partition, you MUST include the
-#    usr, fsck and shutdown hooks.
+#    usr and fsck hooks.
-HOOKS=(base udev systemd autodetect keyboard sd-vconsole modconf block sd-encrypt lvm2 filesystems resume fsck)
+HOOKS=(base udev systemd autodetect modconf keyboard keymap block sd-encrypt lvm2 filesystems fsck)
 
 # COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
+# Use this to compress the initramfs image. By default, zstd compression
 # is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="zstd"
 #COMPRESSION="gzip"
 #COMPRESSION="bzip2"
 #COMPRESSION="lzma"
@@ -64,3 +65,9 @@ HOOKS=(base udev systemd autodetect keyboard sd-vconsole modconf block sd-encryp
 # COMPRESSION_OPTIONS
 # Additional options for the compressor
 #COMPRESSION_OPTIONS=()
+
+# MODULES_DECOMPRESS
+# Decompress kernel modules during initramfs creation.
+# Enable to speedup boot process, disable to save RAM
+# during early userspace. Switch (yes/no).
+#MODULES_DECOMPRESS="yes"

etc/pacman.d/gnupg/gpg.conf

@@ -1,6 +1,5 @@
 no-greeting
 no-permission-warning
-lock-never
 #keyserver-options timeout=10
 keyserver hkps://hkps.pool.sks-keyservers.net:443
 #keyserver hkp://pgp.mit.edu:11371

etc/ssh/sshrc

@@ -0,0 +1 @@
+/home/default/syncthing/default/scripts/login-notify

etc/sudoers

@@ -0,0 +1,136 @@
+## sudoers file.
+##
+## This file MUST be edited with the 'visudo' command as root.
+## Failure to use 'visudo' may result in syntax or file permission errors
+## that prevent sudo from running.
+##
+## See the sudoers man page for the details on how to write a sudoers file.
+##
+
+##
+## Host alias specification
+##
+## Groups of machines. These may include host names (optionally with wildcards),
+## IP addresses, network numbers or netgroups.
+# Host_Alias	WEBSERVERS = www1, www2, www3
+
+##
+## User alias specification
+##
+## Groups of users.  These may consist of user names, uids, Unix groups,
+## or netgroups.
+# User_Alias	ADMINS = millert, dowdy, mikef
+
+##
+## Cmnd alias specification
+##
+## Groups of commands.  Often used to group related commands together.
+# Cmnd_Alias	PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
+# 			    /usr/bin/pkill, /usr/bin/top
+#
+# Cmnd_Alias	REBOOT = /sbin/halt, /sbin/reboot, /sbin/poweroff
+#
+# Cmnd_Alias	DEBUGGERS = /usr/bin/gdb, /usr/bin/lldb, /usr/bin/strace, \
+# 			    /usr/bin/truss, /usr/bin/bpftrace, \
+# 			    /usr/bin/dtrace, /usr/bin/dtruss
+#
+# Cmnd_Alias	PKGMAN = /usr/bin/apt, /usr/bin/dpkg, /usr/bin/rpm, \
+# 			 /usr/bin/yum, /usr/bin/dnf,  /usr/bin/zypper, \
+# 			 /usr/bin/pacman
+
+##
+## Defaults specification
+##
+## Preserve editor environment variables for visudo.
+## To preserve these for all commands, remove the "!visudo" qualifier.
+Defaults!/usr/bin/visudo env_keep += "SUDO_EDITOR EDITOR VISUAL"
+##
+## Use a hard-coded PATH instead of the user's to find commands.
+## This also helps prevent poorly written scripts from running
+## artbitrary commands under sudo.
+Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/bin"
+##
+## You may wish to keep some of the following environment variables
+## when running commands via sudo.
+##
+## Locale settings
+# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
+##
+## Run X applications through sudo; HOME is used to find the
+## .Xauthority file.  Note that other programs use HOME to find   
+## configuration files and this may lead to privilege escalation!
+# Defaults env_keep += "HOME"
+##
+## X11 resource path settings
+# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
+##
+## Desktop path settings
+# Defaults env_keep += "QTDIR KDEDIR"
+##
+## Allow sudo-run commands to inherit the callers' ConsoleKit session
+# Defaults env_keep += "XDG_SESSION_COOKIE"
+##
+## Uncomment to enable special input methods.  Care should be taken as
+## this may allow users to subvert the command being run via sudo.
+# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
+##
+## Uncomment to disable "use_pty" when running commands as root.
+## Commands run as non-root users will run in a pseudo-terminal,
+## not the user's own terminal, to prevent command injection.
+# Defaults>root !use_pty
+##
+## Uncomment to run commands in the background by default.
+## This can be used to prevent sudo from consuming user input while
+## a non-interactive command runs if "use_pty" or I/O logging are
+## enabled.  Some commands may not run properly in the background.
+# Defaults exec_background
+##
+## Uncomment to send mail if the user does not enter the correct password.
+# Defaults mail_badpass
+##
+## Uncomment to enable logging of a command's output, except for
+## sudoreplay and reboot.  Use sudoreplay to play back logged sessions.
+## Sudo will create up to 2,176,782,336 I/O logs before recycling them.
+## Set maxseq to a smaller number if you don't have unlimited disk space.
+# Defaults log_output
+# Defaults!/usr/bin/sudoreplay !log_output
+# Defaults!/usr/local/bin/sudoreplay !log_output
+# Defaults!REBOOT !log_output
+# Defaults maxseq = 1000
+##
+## Uncomment to disable intercept and log_subcmds for debuggers and
+## tracers.  Otherwise, anything that uses ptrace(2) will be unable
+## to run under sudo if intercept_type is set to "trace".
+# Defaults!DEBUGGERS !intercept, !log_subcmds
+##
+## Uncomment to disable intercept and log_subcmds for package managers.
+## Some package scripts run a huge number of commands, which is made
+## slower by these options and also can clutter up the logs.
+# Defaults!PKGMAN !intercept, !log_subcmds
+
+##
+## Runas alias specification
+##
+
+##
+## User privilege specification
+##
+root ALL=(ALL:ALL) ALL
+default ALL=(ALL:ALL) ALL
+
+## Uncomment to allow members of group wheel to execute any command
+%wheel ALL=(ALL:ALL) ALL
+
+## Same thing without a password
+# %wheel ALL=(ALL:ALL) NOPASSWD: ALL
+
+## Uncomment to allow members of group sudo to execute any command
+# %sudo	ALL=(ALL:ALL) ALL
+
+## Uncomment to allow any user to run sudo if they know the password
+## of the user they are running the command as (root by default).
+# Defaults targetpw  # Ask for the password of the target user
+# ALL ALL=(ALL:ALL) ALL  # WARNING: only use this together with 'Defaults targetpw'
+
+## Read drop-in files from /etc/sudoers.d
+@includedir /etc/sudoers.d

etc/systemd/user/wayvnc.service

@@ -5,6 +5,7 @@ BindsTo=sway-session.target
 [Service]
 Type=simple
 ExecStart=/usr/bin/wayvnc
+Environment="WAYLAND_DISPLAY=wayland-1"
 Restart=on-failure
 RestartSec=1
 TimeoutStopSec=10

home/default/.config/alacritty/alacritty.toml

@@ -0,0 +1,3 @@
+[window]
+opacity=0.85
+decorations="None"

home/default/.config/fcitx5/conf/pinyin.conf

@@ -6,8 +6,8 @@ ShowShuangpinMode=True
 PageSize=7
 # Enable Spell
 SpellEnabled=True
-# Enable Emoji
+# Enable Symbols
-EmojiEnabled=True
+SymbolsEnabled=True
 # Enable Chaizi
 ChaiziEnabled=True
 # Enable Characters in Unicode CJK Extension B
@@ -20,8 +20,8 @@ CloudPinyinIndex=1
 CloudPinyinAnimation=True
 # Always show Cloud Pinyin place holder
 KeepCloudPinyinPlaceHolder=False
-# Show preedit within application
+# Preedit Mode
-PreeditInApplication=True
+PreeditMode="Composing pinyin"
 # Fix embedded preedit cursor at the beginning of the preedit
 PreeditCursorPositionAtBeginning=True
 # Show complete pinyin in preedit
@@ -70,6 +70,20 @@ FirstRun=False
 [NextCandidate]
 0=Tab
 
+[CurrentCandidate]
+0=space
+1=KP_Space
+
+[CommitRawInput]
+0=Return
+1=KP_Enter
+2=Control+Return
+3=Control+KP_Enter
+4=Shift+Return
+5=Shift+KP_Enter
+6=Control+Shift+Return
+7=Control+Shift+KP_Enter
+
 [ChooseCharFromPhrase]
 0=bracketleft
 1=bracketright
@@ -77,17 +91,10 @@ FirstRun=False
 [FilterByStroke]
 0=grave
 
-[QuickPhrase trigger]
+[QuickPhraseTriggerRegex]
-0=www.
+0=.(/|@)$
-1=ftp.
+1=^(www|bbs|forum|mail|bbs)\\.
-2=http:
+2=^(http|https|ftp|telnet|mailto):
-3=mail.
-4=bbs.
-5=forum.
-6=https:
-7=ftp:
-8=telnet:
-9=mailto:
 
 [Fuzzy]
 # ue -> ve
@@ -126,4 +133,6 @@ L_N=False
 S_SH=False
 # z <-> zh
 Z_ZH=False
+# Correction Layout
+Correction=None
 

home/default/.config/kanshi/config

@@ -1,4 +1,8 @@
 profile {
-	output "LG Electronics LG IPS QHD 201NTPCGD520" enable scale 1.30 position 0,0 mode 2560x1440@60Hz
+	output "LG Electronics LG IPS QHD 201NTPCGD520" enable scale 1.30 position 0,0 mode 2560x1440@75Hz
-	output "LG Electronics LG ULTRAWIDE 0x00000101" enable position 1968,0 mode 2560x1080@60Hz
+	output "LG Electronics LG IPS QHD 309NTABDW064" enable scale 1.30 position 1974,0 mode 2560x1440@75Hz
+}
+
+profile {
+	output "BOE 0x0BCA Unknown" enable scale 1.75 position 0,0 mode 2256x1504@59.999Hz
 }

home/default/.config/nvim/init.vim

@@ -0,0 +1,3 @@
+" set default vim register to normal clipboard
+set clipboard+=unnamedplus
+colorscheme vim

home/default/.config/ranger/rc.conf

@@ -1,3 +1,3 @@
 set preview_images true
-set preview_images_method kitty
+set preview_images_method ueberzug
 map DD shell trash %s

home/default/.config/sway/config

@@ -9,7 +9,7 @@ set $down j
 set $up k
 set $right l
 
-set $term kitty
+set $term alacritty
 set $menu rofi -show combi | xargs swaymsg exec --
 
 # wallpaper
@@ -43,8 +43,10 @@ exec_always {
 
 # timeout
 exec swayidle -w \
-    timeout 300 'playerctl -a pause && swaylock' \
+    timeout 300 'playerctl -a pause' \
+    timeout 300 'swaylock' \
     timeout 600 'swaymsg "output * dpms off"' \
+    timeout 15 'if pgrep -x swaylock; then swaymsg "output * dpms off"; fi' \
     before-sleep 'playerctl -a pause' \
     lock 'swaylock' \
     resume 'swaymsg "output * dpms on"'
@@ -218,9 +220,6 @@ bindsym XF86Search exec $menu
 # screenshot
 bindsym Ctrl+Shift+p exec ~/scripts/screenshot
 
-# record screen
-# bindsym Ctrl+Alt+p exec ~/scripts/record-screen
-
 ### gaps
 gaps inner 25
 # smart_gaps on
@@ -230,6 +229,9 @@ bindsym $mod+Shift+d border toggle
 bindsym $mod+m exec makoctl dismiss
 bindsym $mod+n exec makoctl restore
 
+# wayvnc
+bindsym $mod+Shift+o exec wayvncctl output-cycle
+
 ### styles
 
 # class			border	backgr	text
@@ -240,6 +242,13 @@ client.unfocused	#222222	#222222 #AAAAAA
 # font
 font pango: IBMPlexMono Regular 10
 
+input "5215:621:SINO_WEALTH_GXT_144_Gaming_Mouse" {
+    accel_profile "flat"
+    dwt disabled 
+    left_handed disabled
+    pointer_accel -0.78
+}
+
 # wacom
 input "1386:770:Wacom_Intuos_PT_S_Pen" {
     accel_profile "flat"

home/default/.profile

@@ -1,12 +1,14 @@
 # qt5ct
 export QT_QPA_PLATFORMTHEME=qt5ct
 export QT_AUTO_SCREEN_SCALE_FACTOR=1
+export QT_STYLE_OVERRIDE=Adwaita-Dark
 
 # waybar
 export XDG_CURRENT_DESKTOP=sway
 
 # gtk
-export GTK_THEME=Materia:dark
+export GTK2_RC_FILES=/usr/share/themes/Adwaita-dark/gtk-2.0/gtkrc
+export GTK_THEME=Adwaita:dark
 
 # ibus
 export GTK_IM_MODULE=fcitx

home/default/scripts/add-song

@@ -0,0 +1,7 @@
+#!/usr/bin/env sh
+set -eou pipefail
+
+echo "$1" | wget-titles-from-urls >> titles.txt
+echo "$1" | youtube-audio
+ls -Art | tail -n 1 | xargs -d '\n' kid3
+standardize-music

home/default/scripts/append-urls-to-titles

@@ -1,23 +0,0 @@
-#!/usr/bin/env sh
-set -eou pipefail
-
-# Old script to get json url for some reason? Don't know why I did this
-# youtube-dl -j --flat-playlist -a - | \
-# jq -r '.id' | \
-# sed 's_^_https://youtu.be/_' | \
-# wget-titles-from-urls >> titles.txt
-
-test -f append.txt
-if [[ $? -ne 0 ]]; then
-    echo No append.txt found! Cannot append
-    exit
-fi
-
-if [[ ! -s append.txt ]]; then
-    echo append.txt is empty
-    exit
-fi
-
-cat append.txt | wget-titles-from-urls >> titles.txt
-cat append.txt | youtube-audio
-> append.txt

home/default/scripts/booksplit

@@ -1,46 +0,0 @@
-#!/bin/sh
-
-# Requires ffmpeg (audio splitting) and my `tag` wrapper script.
-
-[ ! -f "$2" ] && printf "The first file should be the audio, the second should be the timecodes.\\n" && exit
-
-echo "Enter the album/book title:"; read -r booktitle
-
-echo "Enter the artist/author:"; read -r author
-
-echo "Enter the publication year:"; read -r year
-
-inputaudio="$1"
-
-# Get a safe file name from the book.
-#escbook="$(echo "$booktitle" | iconv -cf UTF-8 -t ASCII//TRANSLIT | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g")"
-escbook="$(echo "$booktitle" | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g")"
-
-! mkdir -p "$escbook" && echo "Do you have write access in this directory?" && exit 1
-
-# As long as the extension is in the tag script, it'll work.
-ext="opus"
-#ext="${1#*.}"
-
-# Get the total number of tracks from the number of lines.
-total="$(wc -l < "$2")"
-
-while read -r x;
-do
-	end="$(echo "$x" | cut -d' ' -f1)"
-	[ -n "$start" ] &&
-	echo "From $start to $end; $track $title"
-	file="$escbook/$(printf "%.2d" "$track") - $author - $esctitle.$ext"
-	[ -n "$start" ] && echo "Splitting \"$title\"..." && ffmpeg -nostdin -y -loglevel -8 -i "$inputaudio" -ss "$start" -to "$end" -vn "$file" &&
-		echo "Tagging \"$title\"..." && tag -a "$author" -A "$booktitle" -t "$title" -n "$track" -N "$total" -d "$year" "$file"
-	title="$(echo "$x" | cut -d' ' -f 2-)"
-	# esctitle="$(echo "$title" | iconv -cf UTF-8 -t ASCII//TRANSLIT | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g")"
-	esctitle="$(echo "$title" | tr -d '[:punct:]' | tr '[:upper:]' '[:lower:]' | tr ' ' '-' | sed "s/-\+/-/g;s/\(^-\|-\$\)//g")"
-	track="$((track+1))"
-	start="$end"
-done < "$2"
-# The last track must be done outside the loop.
-echo "From $start to the end: $title"
-file="$escbook/$track - $author - $esctitle.$ext"
-echo "Splitting \"$title\"..." && ffmpeg -nostdin -y -loglevel -8 -i "$inputaudio" -ss "$start" -vn "$file" &&
-		echo "Tagging \"$title\"..." && tag -a "$author" -A "$booktitle" -t "$title" -n "$track" -N "$total" -d "$year" "$file"

home/default/scripts/convert-to-audio

@@ -1,32 +0,0 @@
-#!/usr/bin/env sh
-
-# rename .MKV -> .MKV
-count=`ls -1 *.JPG 2>/dev/null | wc -l`
-if [ $count != 0 ]; then
-  rename MKV mkv *.MKV
-fi
-  
-# convert to opus
-count=`ls -1 *.mkv 2>/dev/null | wc -l`
-if [ $count != 0 ]; then
-  for i in *.mkv; do
-    ffmpeg -i "$i" "${i%.mkv}.opus";
-    rm "$i";
-  done
-fi
-
-# rename .WEBM -> .webm
-count=`ls -1 *.WEBM 2>/dev/null | wc -l`
-if [ $count != 0 ]; then 
-  rename WEBM webm *.WEBM
-fi
-  
-# convert to opus
-count=`ls -1 *.webm 2>/dev/null | wc -l`
-if [ $count != 0 ]; then
-  for i in *.webm; do
-    ffmpeg -i "$i" "${i%.webm}.opus";
-    rm "$i";
-  done
-fi 
-

home/default/scripts/generate-playlists

@@ -1,64 +1,8 @@
 #!/usr/bin/env sh
 set -ou pipefail
 
-# Generates playlists for all mp3 and flac files in a directory, ignoring itself in the "parent" folder
+for dir in */; do
-
+	name=`echo "$dir" | sed 's/\/$//g'`
-PLAYLIST_FOLDER="/home/default/Music/playlists/mpd"     # Playlist folder for mpd
+	(cd $dir && echo "#EXTM3U" > "$name.m3u" && ls | grep -v -E '\.txt|\.m3u' >> "$name.m3u")
-PREFIX="music/playlists"                                # relative links to add to playlists, based on mpd virtual file structure
-EXTENSIONS=("mp3" "opus" "flac" "m4a" "mkv" "webm")
-
-# Disable nullglob and set pattern matching to fix spaces
-shopt -s nullglob
-SAVEIFS=$IFS
-IFS=$(echo -en "\n\b")
-
-cd $PLAYLIST_FOLDER || { echo "Could not cd into PLAYLIST_FOLDER"; exit 1; }
-parent=`basename $PWD`
-
-# Delete old generated playlists
-if [[ -f "*.gen.m3u" ]]; then
-    rm *.gen.m3u
-fi
-if [[ -f ".trackNames" ]]; then
-    rm .trackNames
-fi
-
-# For all playlist directories to generate
-for playlistDir in ../*; do
-    if [[ -d "$playlistDir" ]] && [[ "$playlistDir" != "../$parent" ]]; then
-	# playlist filename needed for mpd
-    playlist=`echo "$playlistDir" | sed "s/^\.\.\///g"`
-	# escaped version of filename needed for bash
-    escaped=`printf '%q\n' "$playlist"`
-
-    # echo "playlist=$playlist"
-    # echo "escaped=$escaped"  
-
-	# touch file
-    > "$playlist.gen.m3u"
-        
-	# write all files with newlines
-    > .track-names
-
-    for EXT in ${EXTENSIONS[@]}; do
-        # echo `find "../$playlist" -mindepth 1 -type f -name "*.$EXT" -printf x | wc -c`
-        if [[ `find "../$playlist" -mindepth 1 -type f -name "*.$EXT" -printf x | wc -c` != 0 ]]; then
-            ls -1 ../$escaped/*.$EXT >> .track-names 2> /dev/null
-            # echo `ls -1 ../$playlist/*.$EXT >> 2> /dev/null`
-        fi
-    done
-   
-    # echo `cat .track-names` 
-    cat .track-names | while IFS="" read -r song || [ -n "$song" ] ; do
-        unprefixed=`echo "$song" | sed "s/^\.\.\///g"`
-        # echo "$PREFIX/$unprefixed"
-        echo "$PREFIX/$unprefixed" >> "$playlist.gen.m3u"
-    done < .track-names
-    
-    if [[ -f ".track-names" ]]; then
-        rm .track-names
-    fi
-fi
 done
 
-IFS=$SAVEIFS

home/default/scripts/list-packages

@@ -1,7 +1,4 @@
 #!/usr/bin/env bash
 set -eou pipefail
 
-echo $(pacman -Qqe) | \
+sudo bash -c 'echo $(pacman -Qqe) | tr " " "\n" | sort > /packages.txt'
-    tr " " "\n" | \
-    sort \
-    > /packages.txt

home/default/scripts/mp3-to-opus

@@ -1,5 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-for i in *.mp3; do ffmpeg -i "$i" -c:a libopus "${i%.*}.opus"; done
-trash *.mp3

home/default/scripts/record-screen

@@ -2,5 +2,5 @@
 
 # record video
 dir=~/Downloads/temp
-(cd $dir && wf-recorder -g "$(slurp)" --audio --file=$(date +%Y-%m-%d_%H-%m-%s).mp4)
+(cd $dir && wf-recorder -g "$(slurp)" -a alsa_output.pci-0000_0b_00.4.analog-stereo.monitor --file=$(date +%Y-%m-%d_%H-%m-%s).mp4)
 xdg-open $dir

home/default/scripts/remove-exif

@@ -6,11 +6,17 @@ if [ $count != 0 ]; then
   rename JPG jpg *.JPG
 fi
   
+# rename .jpeg -> .jpg
+count=`ls -1 *.jpeg 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+  rename jpeg jpg *.jpeg
+fi
+  
 # remove exif except orientation from .jpg
 count=`ls -1 *.jpg 2>/dev/null | wc -l`
 if [ $count != 0 ]; then
   for i in *.jpg; do
-    exiftool -all= -overwrite_original -tagsfromfile @ -Orientation "$i"
+    /usr/bin/vendor_perl/exiftool -all= -overwrite_original -tagsfromfile @ -Orientation "$i"
   done
 fi
 
@@ -24,7 +30,7 @@ fi
 count=`ls -1 *.png 2>/dev/null | wc -l`
 if [ $count != 0 ]; then
   for i in *.png; do
-    exiftool -all= -overwrite_original -tagsfromfile @ -Orientation "$i"
+    /usr/bin/vendor_perl/exiftool -all= -overwrite_original -tagsfromfile @ -Orientation "$i"
   done
 fi 
 

home/default/scripts/restart-audio

@@ -1,12 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-echo stopping pipewire-media-session...
-systemctl --user stop pipewire-media-session
-echo stopping pipewire...
-systemctl --user stop pipewire
-echo starting pipewire...
-systemctl --user start pipewire
-echo starting pipewire-media-session...
-systemctl --user start pipewire-media-session
-

home/default/scripts/restart-bluetooth

@@ -1,12 +1,13 @@
 #!/usr/bin/env bash
-set -euo pipefail
+set -euox pipefail
+
+pkill -f blueman-manager || true
 
 echo stopping bluetooth...
-sudo systemctl stop bluetooth-autoconnect
 sudo systemctl stop bluetooth
-sudo rmmod btusb
+sudo modprobe -r btusb
 
 echo starting bluetooth...
 sudo modprobe btusb
 sudo systemctl start bluetooth
-sudo systemctl start bluetooth-autoconnect
+sudo rfkill unblock bluetooth

home/default/scripts/scrub-ufw

@@ -1,16 +0,0 @@
-#!/bin/sh
-echo "Stopping firewall and allowing everyone..."
-ipt="/usr/bin/iptables"
-## Failsafe - die if /sbin/iptables not found
-[ ! -x "$ipt" ] && { echo "$0: \"${ipt}\" command not found."; exit 1; }
-$ipt -P INPUT ACCEPT
-$ipt -P FORWARD ACCEPT
-$ipt -P OUTPUT ACCEPT
-$ipt -F
-$ipt -X
-$ipt -t nat -F
-$ipt -t nat -X
-$ipt -t mangle -F
-$ipt -t mangle -X
-$ipt iptables -t raw -F
-$ipt -t raw -X

home/default/scripts/sort-by-length

@@ -1,4 +0,0 @@
-#!/usr/bin/env bash
-set -euo pipefail
-
-cat input.txt | awk '{ print length, $0 }' | sort -n | cut -d" " -f2-

home/default/scripts/standardize-music

@@ -0,0 +1,53 @@
+#!/usr/bin/env sh
+set -ou pipefail
+
+count=`ls -1 *.OGG 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+  rename OGG ogg *.OGG
+fi
+  
+count=`ls -1 *.ogg 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+    for i in *.ogg; do
+        ffmpeg -y  -i "$i" -map_metadata 0:s:a:0 "${i%.*}.mp3" && rm "$i"
+    done
+fi
+
+count=`ls -1 *.WEBM 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+  rename WEBM webm *.WEBM
+fi
+  
+count=`ls -1 *.webm 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+    for i in *.webm; do
+        ffmpeg -y  -i "$i" -map_metadata 0:s:a:0 "${i%.*}.mp3" && rm "$i"
+    done
+fi
+
+count=`ls -1 *.OPUS 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+  rename OPUS opus *.OPUS
+fi
+  
+count=`ls -1 *.opus 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+    for i in *.opus; do
+        ffmpeg -y  -i "$i" -map_metadata 0:s:a:0 "${i%.*}.mp3" && rm "$i"
+    done
+fi
+
+count=`ls -1 *.M4A 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+  rename M4A m4a *.M4A
+fi
+  
+count=`ls -1 *.m4a 2>/dev/null | wc -l`
+if [ $count != 0 ]; then
+    for i in *.m4a; do
+        ffmpeg -y  -i "$i" -map_metadata 0:s:a:0 "${i%.*}.mp3" && rm "$i"
+    done
+fi
+
+shopt -s nullglob
+rsgain custom --skip-existing --lowercase --tagmode=i *.mp3 *.flac

home/default/scripts/sync-car

@@ -0,0 +1,21 @@
+#!/usr/bin/env sh
+set -eou pipefail
+
+sudo mkdir -p /run/media/default
+
+echo "mounting /run/media/default/MUSIC"
+sudo fsck -fy /dev/disk/by-uuid/E6F8-C183 || true
+sudo mkdir /run/media/default/MUSIC || true
+sudo mount -U E6F8-C183 /run/media/default/MUSIC 
+
+echo "syncing music..."
+sudo rsync --info=progress2 -W -r --delete /home/default/Music/* /run/media/default/MUSIC/
+sudo sync /run/media/default/MUSIC/
+
+cd /run/media/default/MUSIC
+sudo /home/default/scripts/generate-playlists
+cd /home/default
+
+echo "unmounting /run/media/default/MUSIC"
+sudo umount /dev/disk/by-uuid/E6F8-C183
+sudo rmdir /run/media/default/MUSIC

home/default/scripts/sync-mp3-player

@@ -0,0 +1,21 @@
+#!/usr/bin/env sh
+set -eou pipefail
+
+sudo mkdir -p /run/media/default
+
+echo "mounting /run/media/default/MUSIC"
+sudo fsck -fy /dev/disk/by-uuid/4619-9B49 || true
+sudo mkdir -p /run/media/default/MUSIC || true
+sudo mount -U 4619-9B49 /run/media/default/MUSIC 
+
+echo "syncing music..."
+sudo rsync --info=progress2 -W -r --delete /home/default/Music/* /run/media/default/MUSIC/
+sudo sync /run/media/default/MUSIC/
+
+cd /run/media/default/MUSIC
+sudo /home/default/scripts/generate-playlists
+cd /home/default
+
+echo "unmounting /run/media/default/MUSIC"
+sudo umount /run/media/default/MUSIC
+sudo rmdir /run/media/default/MUSIC

home/default/scripts/syncthing-rm-stversions

@@ -0,0 +1,9 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+if compgen -G "/home/default/syncthing/*/.stversions/*" > /dev/null; then
+	rm -rf /home/default/syncthing/*/.stversions/*
+	echo "deleted all .stversions"
+else
+	echo "no .stversions to remove"
+fi

home/default/scripts/system-download

@@ -0,0 +1,5 @@
+#!/usr/bin/env sh
+set -eou pipefail
+
+system-update-mirrors
+pacman -Syuw --noconfirm

home/default/scripts/system-free-space

@@ -1,5 +1,8 @@
 #!/usr/bin/env sh
 set -eoux pipefail
 
+rm -rf ~/.cache
+sudo rm -rf /var/cache/pacman/pkg/*
 yay -Sc --noconfirm
+sudo pacman -Sc --noconfirm
 sudo journalctl --vacuum-size=1G

home/default/scripts/system-update

@@ -0,0 +1,6 @@
+#!/usr/bin/env bash
+set -eoux pipefail
+
+system-free-space
+yay --noconfirm -Syu --overwrite \*
+system-free-space

home/default/scripts/tag

@@ -1,59 +0,0 @@
-#!/bin/sh
-
-err() { echo "Usage:
-	tag [OPTIONS] file
-Options:
-	-a: artist/author
-	-t: song/chapter title
-	-A: album/book title
-	-n: track/chapter number
-	-N: total number of tracks/chapters
-	-d: year of publication
-	-g: genre
-	-c: comment
-You will be prompted for title, artist, album and track if not given." && exit 1 ;}
-
-while getopts "a:t:A:n:N:d:g:c:f:" o; do case "${o}" in
-	a) artist="${OPTARG}" ;;
-	t) title="${OPTARG}" ;;
-	A) album="${OPTARG}" ;;
-	n) track="${OPTARG}" ;;
-	N) total="${OPTARG}" ;;
-	d) date="${OPTARG}" ;;
-	g) genre="${OPTARG}" ;;
-	c) comment="${OPTARG}" ;;
-	f) file="${OPTARG}" ;;
-	*) printf "Invalid option: -%s\\n" "$OPTARG" && err ;;
-esac done
-
-shift $((OPTIND - 1))
-
-file="$1"
-
-[ ! -f "$file" ] && echo "Provide file to tag." && err
-
-[ -z "$title" ] && echo "Enter a title." && read -r title
-[ -z "$artist" ] && echo "Enter an artist." && read -r artist
-[ -z "$album" ] && echo "Enter an album." && read -r album
-[ -z "$track" ] && echo "Enter a track number." && read -r track
-
-case "$file" in
-	*.ogg) echo "Title=$title
-Artist=$artist
-Album=$album
-Track=$track
-Total=$total
-Date=$date
-Genre=$genre
-Comment=$comment" | vorbiscomment -w "$file" ;;
-	*.opus) echo "Title=$title
-Artist=$artist
-Album=$album
-Track=$track
-Total=$total
-Date=$date
-Genre=$genre
-Comment=$comment" | opustags -i -S "$file" ;;
-	*.mp3) eyeD3 -Q --remove-all -a "$artist" -A "$album" -t "$title" -n "$track" -N "$total" -Y "$date" "$file" ;;
-	*) echo "File type not implemented yet." ;;
-esac

home/default/scripts/youtube-audio

@@ -2,7 +2,7 @@
 
 # --embed-thumbnail \
 # --audio-format opus \
-youtube-dl \
+yt-dlp \
     --ignore-errors \
     -f bestaudio \
     --rm-cache-dir \

packages.txt

@@ -1,75 +1,58 @@
-adobe-source-han-sans-jp-fonts
+7zip
-adobe-source-han-sans-kr-fonts
+adwaita-dark
+adwaita-qt5-git
+adwaita-qt6-git
 aic94xx-firmware
+alacritty
 amd-ucode
+android-udev
 anki-bin
 arch-install-scripts
+arduino-ide-bin
 asdf-vm
 atomicparsley
 atool
-autoconf
-automake
 base
-bash
+base-devel
 bash-completion
 beets
 bind
-binutils
-bison
 blueman
-bluetooth-autoconnect
 brightnessctl
-bzip2
 calibre
 cbonsai
 ccache
 cheese
 chromium
 cnrdrvcups-lb
-coreutils
+code
 cowsay
 cpupower
 cpupower-gui
-cryptsetup
-cups
-cups-pdf
 darktable
-ddclient
-device-mapper
 dhcpcd
 dialog
-diffutils
+dino
 direnv
+dosfstools
 downgrade
 dxvk-bin
-e2fsprogs
 efibootmgr
 electrum
 elinks
-emacs
+esp-idf
-esptool
 etcher-bin
 evince
-evolution
+exfat-utils
 f2fs-tools
-fail2ban
-fakeroot
-fcitx5
 fcitx5-chinese-addons
 fcitx5-configtool
 fcitx5-gtk
 fcitx5-pinyin-zhwiki
 fcitx5-qt
-fcitx5-solarized
 ffmpegthumbnailer
-file
-filesystem
-findutils
-firefox
-flex
 font-manager
 fortune-mod
-fortune-mod-acecombat
 fortune-mod-calvin
 fortune-mod-confucius
 fortune-mod-doctorwho-new-series
@@ -79,119 +62,81 @@ fortune-mod-hitchhiker
 fortune-mod-matrix
 fortune-mod-portal-game
 fortune-mod-starwars
+fprintd
+framework-system-git
 freecad
-fstl
+freerdp
 fwbuilder
 fwupd
-gajim
 gamemode
-gawk
-gcc
-gcc-libs
 gdlauncher-bin
+gdm
 gedit
-geoclue
-gettext
 gimp
 git
 git-lfs
-glibc
 gnome-disk-utility
 gnome-firmware
 gnome-sound-recorder
-gnu-free-fonts
 gnu-netcat
-gnutls
 gparted
-grep
+gphoto2
 grim
 grub
 gsmartcontrol
-gsound
 gst-libav
 gst-plugins-bad
 gst-plugins-ugly
 gstreamer-vaapi
 gtk-engine-murrine
-gutenprint
+gtk-vnc
+gvfs-gphoto2
 gwakeonlan
-gzip
+hamradio-menus
 handbrake
 hddtemp
+hexedit
 highlight
 htop
 hugin
 hunspell-en_us
-ibus-uniemoji-git
+iio-sensor-proxy
 inkscape
 inotify-tools
 iotop
-iproute2
-iputils
 itstool
-iucode-tool
 iw
 jammr
-jansson
 jq
 kanshi
-kcm-wacomtablet
-kdeconnect
-kdocker
 keepassxc
 kid3
 kitty
 kochmorse
 krita
 lagrange
-leap-motion-driver
 leptonica
 less
 lib32-gamemode
-lib32-giflib
-lib32-gnutls
 lib32-gst-plugins-base-libs
 lib32-gtk3
-lib32-libappindicator-gtk2
 lib32-libappindicator-gtk3
-lib32-libgpg-error
-lib32-libjpeg-turbo
-lib32-libldap
-lib32-libpng
-lib32-libpulse
-lib32-libva
-lib32-libva-mesa-driver
-lib32-libxcomposite
-lib32-libxinerama
 lib32-libxslt
-lib32-mesa-vdpau
-lib32-mpg123
 lib32-ocl-icd
-lib32-openal
-lib32-sqlite
 lib32-v4l-utils
 lib32-vkd3d
-lib32-vulkan-icd-loader
 libappindicator-gtk3
 libdvdcss
 libffado
-libglvnd
 libgnome-keyring
 libgooglepinyin
-libime
-libjbig-shared
-libjpeg6-turbo
 libpinyin
-libpng
-libreoffice-extension-languagetool
 libreoffice-still
 libretro-overlays
 libretro-shaders-slang
-libva-mesa-driver
+librewolf-bin
 libva-utils
 libvncserver
-libxkbcommon
-licenses
 linux
 linux-firmware
 linux-firmware-qlogic
@@ -202,8 +147,6 @@ lshw
 lsp-plugins
 ltunify-git
 lvm2
-m4
-make
 mako
 mallard-ducktype
 man-db
@@ -216,11 +159,11 @@ mediainfo
 mesa
 minecraft-launcher
 mixxx
+mkinitcpio-firmware
 mousetweaks
 mpc
 mpv
 mpv-mpris
-mqtt-explorer
 mumble
 namcap
 nano
@@ -230,7 +173,7 @@ neofetch
 neovim
 networkmanager
 network-manager-applet
-nginx-mod-fancyindex
+networkmanager-openvpn
 nmap
 nomacs
 noto-fonts-cjk
@@ -239,55 +182,42 @@ noto-fonts-extra
 ntfs-3g
 ntp
 nvtop
-obs-studio
-ocl-icd
 odt2txt
-opencc
 opendesktop-fonts
+openh264
 openshot
+openvpn
 opustags
 overdue
 package-query
-pacman-contrib
-paman
 papirus-icon-theme
-patch
 pavucontrol
-pciutils
-perl
 perl-image-exiftool
 perl-rename
 picard
+piper
 pipewire-alsa
-pipewire-jack
 pipewire-pulse
-pixman
-pkgconf
 pkgstats
 playerctl
 playonlinux
 polkit-gnome
+postgresql
 postgresql-libs
-procps-ng
+prismlauncher
 psensor
-psmisc
 pv
-pyside2
-python
 python-axolotl
 python-levenshtein
 python-matplotlib
 python-mutagen
 python-pip
-python-pycryptodome
+python-pyasyncore
 python-pyenchant
 python-pylast
 python-pynvim
 python-wxpython
-qbittorrent
 qt5ct
-qt5-graphicaleffects
-qt5-imageformats
 quodlibet
 ranger
 rar
@@ -297,24 +227,20 @@ remmina
 retroarch
 retroarch-assets-xmb
 rofi
-rsnapshot
+rsgain
 rsync
-samsung_magician-consumer-ssd
 seahorse
-sed
-shadow
 shellcheck
 shotcut
+signal-desktop
 simple-scan
 slurp
 smartmontools
 s-nail
-sndio
 ssh-audit
 sshpass
 stalonetray
 steam
-steam-native-runtime
 sudo
 sway
 swaybg
@@ -324,24 +250,9 @@ syncplay
 syncthing
 syncthing-gtk
 sysfsutils
-systemd-sysvcompat
 systemd-ui
-tar
 telegram-desktop
-texinfo
+thunderbird
-texlive-basic
-texlive-bibtexextra
-texlive-bin
-texlive-fontsextra
-texlive-formatsextra
-texlive-games
-texlive-humanities
-texlive-latexextra
-texlive-mathscience
-texlive-music
-texlive-pictures
-texlive-pstricks
-texlive-publishers
 tlp
 tmux
 traceroute
@@ -350,15 +261,13 @@ tree
 ttf-dejavu
 ttf-ibm-plex
 ttf-joypixels
-ttf-liberation
 ttf-ms-fonts
 ttf-opensans
-ttf-symbola-free
 ttf-ubuntu-font-family
+ueberzugpp
 unicode-emoji
 upd72020x-fw
 usbutils
-util-linux
 vi
 vim
 vkd3d
@@ -369,6 +278,7 @@ vulkan-mesa-layers
 vulkan-radeon
 vulkan-tools
 w3m
+wacomtablet
 wakeonlan
 waybar
 wayland-utils
@@ -376,8 +286,6 @@ wayvnc
 wd719x-firmware
 wdisplays
 wf-recorder
-wget
-which
 wine-staging
 winetricks
 wireguard-tools
@@ -385,9 +293,8 @@ wl-clipboard
 wol
 wpa_supplicant
 xclip
-xdg-desktop-portal
+xdg-desktop-portal-gtk
 xdg-desktop-portal-wlr
-xf86-input-wacom
 xf86-video-amdgpu
 xfsprogs
 xorg-xdpyinfo
@@ -397,6 +304,4 @@ xorg-xwayland
 xsel
 xterm
 yay-bin
-youtube-dl-git
 yt-dlp
-zimg

readme.md

@@ -28,7 +28,7 @@ please let me know if i've forgotten one!
 - waybar (topbar)
 - swayidle (idle daemon)
 - swaylock (lockscreen)
-- kitty (terminal)
+- alacritty (terminal)
 - ranger (file browser)
 - rofi (launcher)
 - mako (notification daemon)