update laptop boot entries

boot/loader/entries/arch-fallback.conf

@@ -2,4 +2,4 @@ title	Arch Linux
 linux	/vmlinuz-linux
 initrd	/amd-ucode.img
 initrd	/initramfs-linux-fallback.img
-options rd.luks.name=3927d3f3-175f-4b72-9e05-395ef5664c81=cryptlvm rd.luks.options=discard root=/dev/ssd1/root resume=/dev/ssd1/swap rw add_efi_memmap kernel=30
+options rd.luks.name=e7ff5b82-f145-4fae-be2a-388314977783=cryptlvm rd.luks.options=discard root=/dev/ssd/root resume=/dev/ssd/swap rw add_efi_memmap kernel=30

boot/loader/entries/arch.conf

@@ -2,4 +2,4 @@ title	Arch Linux
 linux	/vmlinuz-linux
 initrd	/amd-ucode.img
 initrd	/initramfs-linux.img
-options rd.luks.name=3927d3f3-175f-4b72-9e05-395ef5664c81=cryptlvm rd.luks.options=discard root=/dev/ssd1/root resume=/dev/ssd1/swap rw add_efi_memmap kernel=30
+options rd.luks.name=e7ff5b82-f145-4fae-be2a-388314977783=cryptlvm rd.luks.options=discard root=/dev/ssd/root resume=/dev/ssd/swap rw add_efi_memmap kernel=30

etc/fwupd/fwupd.conf

@@ -0,0 +1,8 @@
+# use `man 5 fwupd.conf` for documentation
+[fwupd]
+DisabledPlugins=test;test_ble
+OnlyTrusted=true
+AllowEmulation=false
+
+[uefi_capsule]
+DisableCapsuleUpdateOnDisk=true

etc/mkinitcpio.conf

@@ -3,7 +3,7 @@
 # The following modules are loaded before any boot hooks are
 # run.  Advanced users may wish to specify all system modules
 # in this array.  For instance:
-#     MODULES=(piix ide_disk reiserfs)
+#     MODULES=(usbhid xhci_hcd)
 MODULES=()
 
 # BINARIES
@@ -29,31 +29,32 @@ FILES=()
 # 'filesystems' is _required_ unless you specify your fs modules in MODULES
 # Examples:
 ##   This setup specifies all modules in the MODULES setting above.
-##   No raid, lvm2, or encrypted root is needed.
+##   No RAID, lvm2, or encrypted root is needed.
 #    HOOKS=(base)
 #
 ##   This setup will autodetect all modules for your system and should
 ##   work as a sane default
-#    HOOKS=(base udev autodetect block filesystems)
+#    HOOKS=(base udev autodetect modconf block filesystems fsck)
 #
 ##   This setup will generate a 'full' image which supports most systems.
 ##   No autodetection is done.
-#    HOOKS=(base udev block filesystems)
+#    HOOKS=(base udev modconf block filesystems fsck)
 #
-##   This setup assembles a pata mdadm array with an encrypted root FS.
-##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-#    HOOKS=(base udev block mdadm encrypt filesystems)
+##   This setup assembles a mdadm array with an encrypted root file system.
+##   Note: See 'mkinitcpio -H mdadm_udev' for more information on RAID devices.
+#    HOOKS=(base udev modconf keyboard keymap consolefont block mdadm_udev encrypt filesystems fsck)
 #
-##   This setup loads an lvm2 volume group on a usb device.
-#    HOOKS=(base udev block lvm2 filesystems)
+##   This setup loads an lvm2 volume group.
+#    HOOKS=(base udev modconf block lvm2 filesystems fsck)
 #
 ##   NOTE: If you have /usr on a separate partition, you MUST include the
-#    usr, fsck and shutdown hooks.
-HOOKS=(base udev systemd autodetect keyboard sd-vconsole modconf block sd-encrypt lvm2 filesystems resume fsck)
+#    usr and fsck hooks.
+HOOKS=(base udev systemd autodetect modconf keyboard keymap block sd-encrypt lvm2 filesystems fsck)
 
 # COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
+# Use this to compress the initramfs image. By default, zstd compression
 # is used. Use 'cat' to create an uncompressed image.
+#COMPRESSION="zstd"
 #COMPRESSION="gzip"
 #COMPRESSION="bzip2"
 #COMPRESSION="lzma"
@@ -64,3 +65,9 @@ HOOKS=(base udev systemd autodetect keyboard sd-vconsole modconf block sd-encryp
 # COMPRESSION_OPTIONS
 # Additional options for the compressor
 #COMPRESSION_OPTIONS=()
+
+# MODULES_DECOMPRESS
+# Decompress kernel modules during initramfs creation.
+# Enable to speedup boot process, disable to save RAM
+# during early userspace. Switch (yes/no).
+#MODULES_DECOMPRESS="yes"

etc/pacman.d/gnupg/gpg.conf

@@ -6,3 +6,5 @@ keyserver hkps://hkps.pool.sks-keyservers.net:443
 #keyserver hkp://pgp.mit.edu:11371
 #keyserver hkp://keyserver.ubuntu.com
 keyserver hkps://keyserver.ubuntu.com
+keyserver-options import-clean
+keyserver-options no-self-sigs-only

etc/sudoers

@@ -0,0 +1,99 @@
+## sudoers file.
+##
+## This file MUST be edited with the 'visudo' command as root.
+## Failure to use 'visudo' may result in syntax or file permission errors
+## that prevent sudo from running.
+##
+## See the sudoers man page for the details on how to write a sudoers file.
+##
+
+##
+## Host alias specification
+##
+## Groups of machines. These may include host names (optionally with wildcards),
+## IP addresses, network numbers or netgroups.
+# Host_Alias	WEBSERVERS = www1, www2, www3
+
+##
+## User alias specification
+##
+## Groups of users.  These may consist of user names, uids, Unix groups,
+## or netgroups.
+# User_Alias	ADMINS = millert, dowdy, mikef
+
+##
+## Cmnd alias specification
+##
+## Groups of commands.  Often used to group related commands together.
+# Cmnd_Alias	PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
+# 			    /usr/bin/pkill, /usr/bin/top
+# Cmnd_Alias	REBOOT = /sbin/halt, /sbin/reboot, /sbin/poweroff
+
+##
+## Defaults specification
+##
+## You may wish to keep some of the following environment variables
+## when running commands via sudo.
+##
+## Locale settings
+# Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
+##
+## Run X applications through sudo; HOME is used to find the
+## .Xauthority file.  Note that other programs use HOME to find   
+## configuration files and this may lead to privilege escalation!
+# Defaults env_keep += "HOME"
+##
+## X11 resource path settings
+# Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
+##
+## Desktop path settings
+# Defaults env_keep += "QTDIR KDEDIR"
+##
+## Allow sudo-run commands to inherit the callers' ConsoleKit session
+# Defaults env_keep += "XDG_SESSION_COOKIE"
+##
+## Uncomment to enable special input methods.  Care should be taken as
+## this may allow users to subvert the command being run via sudo.
+# Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
+##
+## Uncomment to use a hard-coded PATH instead of the user's to find commands
+# Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
+##
+## Uncomment to send mail if the user does not enter the correct password.
+# Defaults mail_badpass
+##
+## Uncomment to enable logging of a command's output, except for
+## sudoreplay and reboot.  Use sudoreplay to play back logged sessions.
+# Defaults log_output
+# Defaults!/usr/bin/sudoreplay !log_output
+# Defaults!/usr/local/bin/sudoreplay !log_output
+# Defaults!REBOOT !log_output
+Defaults env_reset,timestamp_timeout=1440
+
+##
+## Runas alias specification
+##
+
+##
+## User privilege specification
+##
+root 		ALL=(ALL) ALL
+default		ALL=(ALL) ALL
+
+## Uncomment to allow members of group wheel to execute any command
+# %wheel ALL=(ALL) ALL
+
+## Same thing without a password
+# %wheel ALL=(ALL) NOPASSWD: ALL
+
+## Uncomment to allow members of group sudo to execute any command
+# %sudo	ALL=(ALL) ALL
+
+## Uncomment to allow any user to run sudo if they know the password
+## of the user they are running the command as (root by default).
+# Defaults targetpw  # Ask for the password of the target user
+# ALL ALL=(ALL) ALL  # WARNING: only use this together with 'Defaults targetpw'
+
+## Read drop-in files from /etc/sudoers.d
+## (the '#' here does not indicate a comment)
+#includedir /etc/sudoers.d

home/default/.config/kanshi/config

@@ -2,3 +2,7 @@ profile {
 	output "LG Electronics LG IPS QHD 201NTPCGD520" enable scale 1.30 position 0,0 mode 2560x1440@60Hz
 	output "LG Electronics LG ULTRAWIDE 0x01010101" enable position 1968,0 mode 2560x1080@60Hz
 }
+
+profile {
+	output "BOE 0x0BCA Unknown" enable scale 1.75 position 0,0 mode 2256x1504@59.999Hz
+}

home/default/.config/sway/config

@@ -44,12 +44,12 @@ exec_always {
 # timeout
 exec swayidle -w \
     timeout 300 'playerctl -a pause && swaylock' \
-    timeout 600 'swaymsg "output * dpms off"' \
+    timeout 600 'swaymsg "output * power off"' \
     before-sleep 'playerctl -a pause' \
     lock 'swaylock' \
-    resume 'swaymsg "output * dpms on"'
+    resume 'swaymsg "output * power on"'
 
-# screen lock
+# system lock
 bindsym Ctrl+Shift+l exec "playerctl -a pause; \
     systemctl suspend && \
     swaylock"

packages.txt

@@ -1,3 +1,4 @@
+acpi
 adobe-source-han-sans-jp-fonts
 adobe-source-han-sans-kr-fonts
 aic94xx-firmware
@@ -10,64 +11,44 @@ arduino-ide-bin
 asdf-vm
 atomicparsley
 atool
-autoconf
-automake
 base
-bash
+base-devel
 bash-completion
 beets
 bind
-binutils
-bison
 blueman
 brightnessctl
-bzip2
 calibre
 cbonsai
 ccache
 cheese
 chromium
 cnrdrvcups-lb
-coreutils
 cowsay
 cpupower
 cpupower-gui
-cryptsetup
-cups
 cups-pdf
 darktable
-device-mapper
 dhcpcd
 dialog
-diffutils
 dino
 direnv
 downgrade
 dxvk-bin
-e2fsprogs
 efibootmgr
 electrum
 elinks
 emacs
-esptool
 etcher-bin
 evince
 evolution
 f2fs-tools
-fail2ban
-fakeroot
-fcitx5
 fcitx5-chinese-addons
 fcitx5-configtool
 fcitx5-gtk
 fcitx5-pinyin-zhwiki
 fcitx5-qt
-fcitx5-solarized
 ffmpegthumbnailer
-file
-filesystem
-findutils
-flex
 font-manager
 fortune-mod
 fortune-mod-calvin
@@ -79,35 +60,27 @@ fortune-mod-hitchhiker
 fortune-mod-matrix
 fortune-mod-portal-game
 fortune-mod-starwars
+fprintd
+framework-system-git
 freecad
+freerdp
 fwbuilder
 fwupd
 gamemode
-gawk
-gcc
-gcc-libs
 gdlauncher-bin
 gedit
-geoclue
-gettext
 gimp
 git
 git-lfs
-glibc
 gnome-disk-utility
 gnome-firmware
 gnome-sound-recorder
-gnu-free-fonts
 gnu-netcat
-gnutls
-google-chrome
 gparted
 gphoto2
-grep
 grim
 grub
 gsmartcontrol
-gsound
 gst-libav
 gst-plugins-bad
 gst-plugins-ugly
@@ -116,7 +89,7 @@ gtk-engine-murrine
 gutenprint
 gvfs-gphoto2
 gwakeonlan
-gzip
+hamradio-menus
 handbrake
 hddtemp
 hexedit
@@ -124,15 +97,13 @@ highlight
 htop
 hugin
 hunspell-en_us
+iio-sensor-proxy
 inkscape
 inotify-tools
 iotop
-iproute2
-iputils
 itstool
 iw
 jammr
-jansson
 jq
 kanshi
 kdocker
@@ -145,51 +116,26 @@ lagrange
 leptonica
 less
 lib32-gamemode
-lib32-giflib
-lib32-gnutls
 lib32-gst-plugins-base-libs
 lib32-gtk3
-lib32-libappindicator-gtk2
 lib32-libappindicator-gtk3
-lib32-libgpg-error
-lib32-libjpeg-turbo
-lib32-libldap
-lib32-libpng
-lib32-libpulse
-lib32-libva
 lib32-libva-mesa-driver
-lib32-libxcomposite
-lib32-libxinerama
 lib32-libxslt
-lib32-mesa-vdpau
-lib32-mpg123
 lib32-ocl-icd
-lib32-openal
-lib32-sqlite
 lib32-v4l-utils
 lib32-vkd3d
-lib32-vulkan-icd-loader
 libappindicator-gtk3
 libdvdcss
 libffado
-libglvnd
 libgnome-keyring
 libgooglepinyin
-libime
-libjbig-shared
-libjpeg6-turbo
 libpinyin
-libpng
-libreoffice-extension-languagetool
 libreoffice-still
 libretro-overlays
 libretro-shaders-slang
-librewolf-bin
 libva-mesa-driver
 libva-utils
 libvncserver
-libxkbcommon
-licenses
 linux
 linux-firmware
 linux-firmware-qlogic
@@ -200,8 +146,6 @@ lshw
 lsp-plugins
 ltunify-git
 lvm2
-m4
-make
 mako
 mallard-ducktype
 man-db
@@ -236,53 +180,41 @@ noto-fonts-extra
 ntfs-3g
 ntp
 nvtop
-ocl-icd
 odt2txt
-opencc
 opendesktop-fonts
 openshot
+openvpn
 opustags
 overdue
+p7zip
 package-query
 papirus-icon-theme
-patch
 pavucontrol
-pciutils
-perl
 perl-image-exiftool
 perl-rename
 picard
 piper
 pipewire-alsa
-pipewire-jack
 pipewire-pulse
-pixman
-pkgconf
 pkgstats
 playerctl
 playonlinux
 polkit-gnome
 postgresql-libs
 prismlauncher
-procps-ng
 psensor
-psmisc
 pv
-pyside2
-python
 python-axolotl
 python-levenshtein
 python-matplotlib
 python-mutagen
 python-pip
-python-pycryptodome
+python-pyasyncore
 python-pyenchant
 python-pylast
 python-pynvim
 python-wxpython
 qt5ct
-qt5-graphicaleffects
-qt5-imageformats
 quodlibet
 ranger
 rar
@@ -292,24 +224,18 @@ remmina
 retroarch
 retroarch-assets-xmb
 rofi
-rsnapshot
 rsync
-samsung_magician-consumer-ssd
 seahorse
-sed
-shadow
 shellcheck
 shotcut
 simple-scan
 slurp
 smartmontools
 s-nail
-sndio
 ssh-audit
 sshpass
 stalonetray
 steam
-steam-native-runtime
 sudo
 sway
 swaybg
@@ -319,12 +245,8 @@ syncplay
 syncthing
 syncthing-gtk
 sysfsutils
-systemd-sysvcompat
 systemd-ui
-tar
 telegram-desktop
-texinfo
-texlive-bin
 tlp
 tmux
 traceroute
@@ -333,15 +255,12 @@ tree
 ttf-dejavu
 ttf-ibm-plex
 ttf-joypixels
-ttf-liberation
 ttf-ms-fonts
 ttf-opensans
-ttf-symbola-free
 ttf-ubuntu-font-family
 unicode-emoji
 upd72020x-fw
 usbutils
-util-linux
 vi
 vim
 vkd3d
@@ -360,8 +279,6 @@ wayvnc
 wd719x-firmware
 wdisplays
 wf-recorder
-wget
-which
 wine-staging
 winetricks
 wireguard-tools
@@ -369,9 +286,8 @@ wl-clipboard
 wol
 wpa_supplicant
 xclip
-xdg-desktop-portal
+xdg-desktop-portal-gnome
 xdg-desktop-portal-wlr
-xf86-input-wacom
 xf86-video-amdgpu
 xfsprogs
 xorg-xdpyinfo
@@ -382,4 +298,3 @@ xsel
 xterm
 yay-bin
 yt-dlp
-zimg